$299.00 $149.00

SKU: AA6070 Categories: ,

Box – Connect your SDI Devices to older VGA Displays

A compact 3G SDI to an analogue VGA scaler and converter. This device allows you to connect SD, HD and 3G SDI signals on older LCD, TV, displays and projectors with only an analogue DB15HD connector inputs while ensuring fast transmission without any signal loss at high bit rates of 2.970Gbit/s. It also integrates a loop-through 3G SDI design which allows VGA analogue conversion plus a pass through 3G SDI output.


  • Operation at 2.970Gbit/s, 2.970/1.001Gbit/s, 1.485Gbit/s, 1.485/1.001Gbit/s and 270Mbits/s
  • Equalized and re-clocked loop output
  • Auto video mode detection (3G/HD/SD)
  • Conversion from SMPTE 425M level B to Level A 1080p 50/59.94/60 4:2:2 10-bit
  • Connect with other units to extend your signal over long distances
  • Simultaneous display with SDI /VGA signals
  • Alternative audio output to analog 2CH
  • Supports signal transmission distances of up to 300M for SD signals, 200M for HD signals and 100M for 3G signals
  • Note: Cable tested with Belden 1694A. Operating distances may vary if used with another type of cable.


  • 3G SDI to VGA Sclaer Converter
  • 5V DC Power Supply Adaptor
  • Operation Manual


SMPTE Standard                 425M Level A & B, 424M, 292M, 259M-C
SDI Transmission Rates       2.970 Gbit/s and 2.970/1.001 Gbit/s
SDI in/out Resolution            SD: 480i@60, 576i@50  HD:720p@50/60, 1080i@50/60  3G:1080p@24/25/29.97/30/50/59.94/60
VGA Output Resolution        800×600@60Hz, 1024×768@60Hz,
Input Port                             1 x BNC (SD/HD/3G-SDI)
Output Port                          1 x BNC (SD/HD/3G-SDI), 1 x VGA,1 x Earphone(L/R)
Power Supply                       DC 5V -12V
ESD Protection Human body model    ±8kV (air-gap discharge) , ±4kV (contact discharge)
Dimension                            95mm x 60mm x 25 mm
Weight                                  260g
Operating Temperature        0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature           -20°C ~ 60°C / -4°F ~ 140°F
elative Humidity                    20 ~ 90% RH (Non-condensing)
Power Consumption (Max)  5W


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.